Can Atomstack Engrave Metal?
Atomstack Engrave Metal
The Atomstack company is making a lot of progress in improving their machines in both build quality and laser power. They have a few different upgrade kits for their machines that are geared towards specific use cases. For example, they have an extension kit to increase the work area of their machines. They also offer rotary modules for engraving mugs and a full enclosure to be used in small spaces that don’t have great ventilation. Their diode lasers are incredibly powerful and can cut through wood or acrylic. This can be a real benefit if you have a large project to work on that requires high speed cuts.
This machine is capable of engraving and cutting through a wide range of materials including wood, plastic, leather, paper, fabric, fruit, and more. It can even etch glass. It can also be used to engrave metals like copper or silver, but it is important to understand that the engraving process for these materials is different and should only be done by a professional.
If you are looking for a way to Atomstack engrave on glass, it is important to note that you will need to use a special type of image file. This is because glass does not react to the laser in a typical way and will not burn it. The best way to do this is by using a vector file that has a thin line around the edge of the design. You can then lower the laser head onto a piece of acrylic that is 2mm thick and tighten the z axis screws with a hex key to ensure that the laser head stays 2mm above the surface of the material you are working on.
Can Atomstack Engrave Metal?
You should always remember that this is a powerful tool that can cause serious injury or fire if not used properly. When engraving or cutting with this machine, always follow all the safety precautions and never leave it unattended. Also, be sure to wear eye protection when working with the laser.
This machine uses a 10W dual laser power system and double compression spot technology to deliver more precise engravings and cuts. This is a great improvement over the older model that was sold with this machine and it offers a much more refined engraving experience.
The machine also has limit switches installed on the x and y-axis so it can find its home position before each new engrave or cut starts. This helps to prevent mistakes and can save you time and effort in the long run.
Another great feature of this machine is the ability to change out the laser module for a different unit. This allows you to use it for different types of projects and makes the overall machine more versatile. It is also easy to assemble and comes with an excellent manual that is clearly labeled with each step. You can also use a variety of software with this machine, such as LaserGRBL and LightBurn.